Transfer case noise
#1
Member
Thread Starter
Join Date: Nov 2008
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0L
Transfer case noise
I have a 01 cherokee, sometimes i can even get the transfer case in 4hi? Also when it does go in and im going 15-20mph it have a load bearing/chain noise under my console? Anyone seen this? Thanks
#5
CF Veteran
If you have to replace the linkage, check out Tera Flex, they have a real nice up grade kit. But why do you think you need all new linkage?
#6
Member
Thread Starter
Join Date: Nov 2008
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0L
I found the problem guys!!!!! it is either a broken snap ring or thrust washer for my output shaft. it about ready to come out!! I can pull it out about a 1/2 inch and it has worn a groove in that steel shield around the shaft. Im probely going to try and find a rebuild kit with a chain and also put a SYE and a new driveshaft in.
Thread
Thread Starter
Forum
Replies
Last Post
eepjeep
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
04-06-2020 03:19 PM
rgr4475
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
13
11-17-2015 08:37 AM
Eyesell
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
09-22-2015 09:21 AM
cali93zj
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
5
09-19-2015 06:18 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)