Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.

TCU wiring diagram for trans Solenoids

Thread Tools
 
Search this Thread
 
Old 07-03-2010, 10:18 AM
  #1  
CF Veteran
Thread Starter
 
tannerp89's Avatar
 
Join Date: Jan 2010
Location: Coeur d' Alene, Idaho
Posts: 1,316
Likes: 0
Received 1 Like on 1 Post
Year: 1998
Model: Cherokee
Engine: 4.0 rebuilt w/ bored TB, banks header, upgraded ignition, 3 row rad, high flow h2o pump, 180* t-stat
Exclamation TCU wiring diagram for trans Solenoids

In need of wiring diagram for the TCU
need to know which wires go to the trans solenoids #1 - #3 to install my shift rail, and dont have a multimeter to test.
I read that lead terminal C14 is my TC lockup (solenoid #3), C15 is solenoid #2 and C16 is #1.
Just want to verify this info and if someone has a wiring diagram and know the wire colors it would be awesome...
Thanks,
-T
Old 07-03-2010, 10:49 AM
  #2  
"CF Moderator"
 
TrekkerJmm's Avatar
 
Join Date: Sep 2008
Location: N.J. Shore Area
Posts: 3,045
Likes: 0
Received 2 Likes on 2 Posts
Year: 1994
Model: Cherokee
Engine: l6 HO
Default

Originally Posted by tannerp89
In need of wiring diagram for the TCU
need to know which wires go to the trans solenoids #1 - #3 to install my shift rail, and dont have a multimeter to test.
I read that lead terminal C14 is my TC lockup (solenoid #3), C15 is solenoid #2 and C16 is #1.
Just want to verify this info and if someone has a wiring diagram and know the wire colors it would be awesome...
Thanks,
-T
I sent you a PM that may help...Tj
Old 07-03-2010, 10:52 AM
  #3  
CF Veteran
Thread Starter
 
tannerp89's Avatar
 
Join Date: Jan 2010
Location: Coeur d' Alene, Idaho
Posts: 1,316
Likes: 0
Received 1 Like on 1 Post
Year: 1998
Model: Cherokee
Engine: 4.0 rebuilt w/ bored TB, banks header, upgraded ignition, 3 row rad, high flow h2o pump, 180* t-stat
Default

thanks TJ, i already actually have the FSM and service manual for the AW4 trans, but couldnt find a proper diagram anywhere in them.
Old 07-03-2010, 11:26 AM
  #4  
CF Veteran
Thread Starter
 
tannerp89's Avatar
 
Join Date: Jan 2010
Location: Coeur d' Alene, Idaho
Posts: 1,316
Likes: 0
Received 1 Like on 1 Post
Year: 1998
Model: Cherokee
Engine: 4.0 rebuilt w/ bored TB, banks header, upgraded ignition, 3 row rad, high flow h2o pump, 180* t-stat
Default

does this look right?
Attached Images  
Old 07-03-2010, 01:54 PM
  #5  
CF Veteran
Thread Starter
 
tannerp89's Avatar
 
Join Date: Jan 2010
Location: Coeur d' Alene, Idaho
Posts: 1,316
Likes: 0
Received 1 Like on 1 Post
Year: 1998
Model: Cherokee
Engine: 4.0 rebuilt w/ bored TB, banks header, upgraded ignition, 3 row rad, high flow h2o pump, 180* t-stat
Default

No one huh?
Im pretty sure its the correct diagram, I just hate wiring and would hate to mess this up.....
Old 07-04-2010, 11:11 AM
  #6  
CF Veteran
Thread Starter
 
tannerp89's Avatar
 
Join Date: Jan 2010
Location: Coeur d' Alene, Idaho
Posts: 1,316
Likes: 0
Received 1 Like on 1 Post
Year: 1998
Model: Cherokee
Engine: 4.0 rebuilt w/ bored TB, banks header, upgraded ignition, 3 row rad, high flow h2o pump, 180* t-stat
Default

ok well after tearing my passenger side dash apart and NOT finding my TCU,
I found it under the dash on the drivers side, and It's not a C32 plug like the above diagram.
It's a C24 plug, only has C1-C12 and D1-D12, I know its the TCU, but cant for the life of me find a diagram.
Is there an easy way to tell which wires are the Power, Torque Convertor (Solenoid #3), Solenoid #1, and Solenoid #2?
I dont have a multimeter or I would test, I know they read 15-16 ohms.
I tried to run a wire from the fuse block to the plug, to manually make it shift/lock up, but couldnt get it to work.....I feel retarded....Help!!!
Old 07-04-2010, 11:15 AM
  #7  
CF Veteran
 
Tural's Avatar
 
Join Date: Jan 2010
Location: Forest, VA
Posts: 3,379
Likes: 0
Received 0 Likes on 0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0 I6
Default

hey tanner, i don't know anything about your problem, but harbor freight got a multimeter for like 5 bucks. i've been using it problem free for 3 years.
Old 07-04-2010, 11:18 AM
  #8  
CF Veteran
Thread Starter
 
tannerp89's Avatar
 
Join Date: Jan 2010
Location: Coeur d' Alene, Idaho
Posts: 1,316
Likes: 0
Received 1 Like on 1 Post
Year: 1998
Model: Cherokee
Engine: 4.0 rebuilt w/ bored TB, banks header, upgraded ignition, 3 row rad, high flow h2o pump, 180* t-stat
Default

Originally Posted by Tural
hey tanner, i don't know anything about your problem, but harbor freight got a multimeter for like 5 bucks. i've been using it problem free for 3 years.
thanks, ill check that out tomarrow.
Old 02-02-2013, 11:41 AM
  #9  
CF Veteran
 
Drewjharper1900's Avatar
 
Join Date: Mar 2011
Location: Tampa Fl
Posts: 1,751
Likes: 0
Received 3 Likes on 3 Posts
Year: 1997
Model: Cherokee
Engine: 4.0 HO
Default

Did you ever figure out what wires go to each solenoids?
Old 02-20-2013, 10:42 PM
  #10  
Newbie
 
RedHorsey's Avatar
 
Join Date: Feb 2013
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0
Default

sorry for hijacking, but does anyone have/ know of correct voltages for the TCM wiring harness? My 95 XJ is stuck in 4th no lockup D, stays in 1st in 1-2 selection, and 3rd selection gives me 3rd no lock up. Its like the TCM is unplugged but it is. I have checked said TCM in another cherokee and its fine. any help would be appreciated.
Old 02-21-2013, 04:50 AM
  #11  
Senior Member
 
67 GMC's Avatar
 
Join Date: May 2012
Location: Fort Erie, CANADA
Posts: 925
Received 5 Likes on 4 Posts
Year: 1987
Model: Cherokee
Engine: 4.0
Default

Originally Posted by RedHorsey
sorry for hijacking, but does anyone have/ know of correct voltages for the TCM wiring harness? My 95 XJ is stuck in 4th no lockup D, stays in 1st in 1-2 selection, and 3rd selection gives me 3rd no lock up. Its like the TCM is unplugged but it is. I have checked said TCM in another cherokee and its fine. any help would be appreciated.
There's an inline fuse to the TCU and a resistor on my '87. If there's no power to the TCU, it won't shift unless you move the shifter. Here's a good thread on:
http://www.naxja.org/forum/showthread.php?t=1053970
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
t.mcginley.jr
Jeep Builds
105
01-31-2024 04:58 PM
Psiegrist1
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
34
03-17-2022 02:15 PM
aroundincircles
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
10-06-2015 11:12 AM
Programbo
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
21
09-26-2015 11:32 AM
Vegas101
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
0
09-04-2015 11:52 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: TCU wiring diagram for trans Solenoids



All times are GMT -5. The time now is 11:02 AM.