Steering wheel looseness in a 98 xj, adjust steering box?
#1
Newbie
Thread Starter
Join Date: Sep 2009
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Steering wheel looseness in a 98 xj, adjust steering box?
Hi. First post so hopefully i do it right.
Wasn't getting much help on the other forum so I'm hoping it'll be better here.
I just bough a 98 auto xj for super cheap. It had some major steering problems that i'm looking to fix before i start driving it as a DD.
I replaced the inner tie rod end that is attached to the pitman arm as it was bad. All the rest of the ball joints looked good.
I have about 20-30 degrees of play where i can move the steering wheel without the tires moving. Making me think it's in the steering box and it's either bad or needs and adjustment. The problem has to be between the steering box and steering wheel so is there something i can check to pinpoint it?
thanks.
Wasn't getting much help on the other forum so I'm hoping it'll be better here.
I just bough a 98 auto xj for super cheap. It had some major steering problems that i'm looking to fix before i start driving it as a DD.
I replaced the inner tie rod end that is attached to the pitman arm as it was bad. All the rest of the ball joints looked good.
I have about 20-30 degrees of play where i can move the steering wheel without the tires moving. Making me think it's in the steering box and it's either bad or needs and adjustment. The problem has to be between the steering box and steering wheel so is there something i can check to pinpoint it?
thanks.
#3
Look at the shaft as it's going in to the box. Have someone else slowly turn the wheel. You'll be able to see if there is slop in the wheel/steering shaft, or if it's in the box.
If you're turning the input of the steering box 30 degrees and the pitman arm is not moving, it's the box!
If you're turning the input of the steering box 30 degrees and the pitman arm is not moving, it's the box!
#4
CF Veteran
Join Date: Oct 2008
Location: Stafford,VA
Posts: 2,543
Likes: 0
Received 5 Likes
on
5 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
Look at the shaft as it's going in to the box. Have someone else slowly turn the wheel. You'll be able to see if there is slop in the wheel/steering shaft, or if it's in the box.
If you're turning the input of the steering box 30 degrees and the pitman arm is not moving, it's the box!
If you're turning the input of the steering box 30 degrees and the pitman arm is not moving, it's the box!
#5
Newbie
Thread Starter
Join Date: Sep 2009
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
I looked at those when my buddy turned the wheel and didn't notice any play in them. Didn't look at the shaft too much though so i'll give that a try.
I'm headed to the local salvage yard sometime and didn't know how much a used steering box should go for(if i decide I should replace it.)
I've also heard a durango steering box fix and is about the same only better,
and what's the procedure in replacing the steering box? I hear it's not too pretty....
#7
Newbie
Thread Starter
Join Date: Sep 2009
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Yeah i'll definitely give a tighening a try first, i just figured i'd start getting prepared for the worst at the same time. That way if it is just an adjustment it'll be almost like a surprise, and if it isn't it wont be as disappointing.
Trending Topics
#8
Newbie
Thread Starter
Join Date: Sep 2009
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
So let me clearify this tightening.
I'm looking at that lone nut in the middle of the other 4. I untighten that, then the entire middle bolt should tighten with what(alan wrench?)
1/8-1/4 turn at a time.
Tighten the nut back up and see what happens?
I'm looking at that lone nut in the middle of the other 4. I untighten that, then the entire middle bolt should tighten with what(alan wrench?)
1/8-1/4 turn at a time.
Tighten the nut back up and see what happens?
#9
Newbie
Thread Starter
Join Date: Sep 2009
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Okay. I took the fan out, Tightened the screw with little if any help to the problem i'm having.
Anything else i should try before going out and buying a different one(most likely used if the local junk yard has one.)
I'm going to wait and have my good friend/motorcycle mechanic look at it. He's a big gear head and also used to own a grand cherokee so i'm hoping he'll be able to help.
i've also got some pretty loud steering pump whine. could this be a cause of my steering problems or just a side affect or individual problem?
Anything else i should try before going out and buying a different one(most likely used if the local junk yard has one.)
I'm going to wait and have my good friend/motorcycle mechanic look at it. He's a big gear head and also used to own a grand cherokee so i'm hoping he'll be able to help.
i've also got some pretty loud steering pump whine. could this be a cause of my steering problems or just a side affect or individual problem?
Last edited by PUNISHER VETTE; 09-15-2009 at 09:45 PM.
#10
Seasoned Member
Join Date: Jun 2009
Location: W.V.
Posts: 336
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0 I6
im having the same problem on mine. i need to replace the u joint but it looks like a real pita to change. any advice on that? sorry to butt in i dont want to highjack the thread just thought it might help you out as well.
#11
Newbie
Join Date: Oct 2008
Location: Reno, Nevada
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Engine: 4.0L HO
Has this been resolved? If not, I'd recommend checking the intermidiate shaft. I have a '92 and just found/fixed this. There is a rubber filled coupler toward the steering column end of the shaft that has failed. I removed the shaft, welded the coupler and reinstalled. Steering is now firm with no play.
#12
I turn my wheel side to side (98 XJ) and I hear a clunk. I adjust my box when I first got it (about 6 months ago), so its making me feel like its bad. Yesterday I swapped track bars and I had to do some banging to get it out. Sound like its bad or did I throw it off by all the amazing I did to the old track bar?
Sorry for having the lost. I just really need help.
Sorry for having the lost. I just really need help.
Thread
Thread Starter
Forum
Replies
Last Post
southfloridajeeps
Modified XJ Cherokee Tech
32
03-04-2023 01:10 PM
bradleyheathhays
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
6
10-03-2015 09:51 PM
riderjay253
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
09-16-2015 11:31 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)