removing wiper arms and cowl
#1
CF Veteran
Thread Starter
Join Date: Sep 2010
Location: Milwaukee, WI
Posts: 21,168
Likes: 0
Received 5 Likes
on
5 Posts
Year: 1987
Engine: Check
removing wiper arms and cowl
I am trying to get my cowl cover off. I've removed the half dozen or so screws that hold it down, but I need to know how to remove the wiper arms.
Does anyone know the easiest way to do this?
Does anyone know the easiest way to do this?
#3
CF Veteran
Thread Starter
Join Date: Sep 2010
Location: Milwaukee, WI
Posts: 21,168
Likes: 0
Received 5 Likes
on
5 Posts
Year: 1987
Engine: Check
Thanks to ODgreen89on35s I got specific instructions.
There are several screws, but for the arms there is a tab on the side of the wiper arm closest to the windshield, near the cowl. Slide the pin toward the glass and the wiper arm slides right up.
Here is a pic of the tab...
There are several screws, but for the arms there is a tab on the side of the wiper arm closest to the windshield, near the cowl. Slide the pin toward the glass and the wiper arm slides right up.
Here is a pic of the tab...
#4
CF Veteran
Join Date: Dec 2010
Location: Finger Lakes Region NY
Posts: 1,234
Likes: 0
Received 1 Like
on
1 Post
Year: 1990
Model: Cherokee
Engine: 4.o
lift the arm a little bit and the lock plate can be pulled out, enoughf to release the arm
exactly! there is a small tab just that you pry up a 1/4 of an inch with a flat blade screw driver, then gentle pull the wiper arm off the pivot point (its splined on the inside)
even better a pic while i was typing.
exactly! there is a small tab just that you pry up a 1/4 of an inch with a flat blade screw driver, then gentle pull the wiper arm off the pivot point (its splined on the inside)
even better a pic while i was typing.
Thread
Thread Starter
Forum
Replies
Last Post
lgrant
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
07-05-2022 12:19 AM
nicksan
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
28
03-08-2016 11:33 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)