Mark this thread as Unsold
[FS] Hydro assist steering box.
#1
Senior Member
Thread Starter
Join Date: Feb 2010
Location: Richland Center, WI
Posts: 502
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0
Hydro assist steering box.
I have a spare drilled and tapped steering box that is ready for use for hydro assist. Just hook up your lines and your ready to go. Asking $100 OBO plus shipping. located in Platteville Wi.
#7
Senior Member
Thread Starter
Join Date: Feb 2010
Location: Richland Center, WI
Posts: 502
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0
It worked fine but with 40s it was not quite what he wanted and he decided to make his xj a dedicated trail rig so street ability wasn't a concern.
Trending Topics
#8
Seasoned Member
Join Date: Jun 2011
Location: San Antonio
Posts: 489
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Engine: 6 Cyl
Full hydro? Sorry but new to hydro and looking to upgrade xj to hydro, and really don't know anything about all of the components.
#9
Senior Member
Thread Starter
Join Date: Feb 2010
Location: Richland Center, WI
Posts: 502
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0
Hydro assist is street legal because there is still a physical connection between the steering wheel and the tires. In full hydro there is no steering box instead there is a orbital valve that decides which direction the hydraulic fluid goes. Since the steering is only connected to the wheel by hydraulic lines if you lose power then you lose steering.
#11
Senior Member
Thread Starter
Join Date: Feb 2010
Location: Richland Center, WI
Posts: 502
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0
You would need a ram and lines and a way to mount the ram. I don't have a correct sized ram for a Dana 30.
#12
Seasoned Member
Join Date: Jun 2011
Location: San Antonio
Posts: 489
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Engine: 6 Cyl
I am interested in the box, but need to explore the additional cost associated with the install. Do you have any links for the ram and hydraulic lines needed?
Thanks again, and hope I am not wearing you out. Just want to buy the right thing and do it once. I get tired of rebuilding...
Thanks again, and hope I am not wearing you out. Just want to buy the right thing and do it once. I get tired of rebuilding...
#13
Senior Member
Thread Starter
Join Date: Feb 2010
Location: Richland Center, WI
Posts: 502
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0
These are the parts I used.
https://www.trail-gear.com/TG/Hydro_...x#.U86Y8hko7qA
https://www.trail-gear.com/TG/OD_Tub...x#.U86ZZRko7qA
https://www.trail-gear.com/TG/Hydro_...x#.U86Y8hko7qA
https://www.trail-gear.com/TG/OD_Tub...x#.U86ZZRko7qA
Thread
Thread Starter
Forum
Replies
Last Post
Austindude2015
Cherokee Chat
17
12-28-2020 05:12 PM
kend3031
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
1
09-30-2015 08:15 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)